The Standard ML Basis Library


The StringCvt structure


Synopsis

signature STRING_CVT
structure StringCvt :> STRING_CVT

The StringCvt structure provides types and functions for handling the conversion between strings and values of various basic types.


Interface

datatype radix = BIN | OCT | DEC | HEX
datatype realfmt
  = SCI of int option
  | FIX of int option
  | GEN of int option
  | EXACT
type ('a,'breader = 'b -> ('a * 'b) option
val padLeft  : char -> int -> string -> string
val padRight : char -> int -> string -> string
val splitl : (char -> bool)
               -> (char, 'a) reader -> 'a -> string * 'a
val takel : (char -> bool)
              -> (char, 'a) reader -> 'a -> string
val dropl : (char -> bool) -> (char, 'a) reader -> 'a -> 'a
val skipWS : (char, 'a) reader -> 'a -> 'a
type cs
val scanString : ((char, cs) reader -> ('a, cs) reader)
                   -> string -> 'a option

Description

datatype radix = BIN | OCT | DEC | HEX
The values of type radix are used to specify the radix of a representation of an integer, corresponding to the bases 2, 8, 10, and 16, respectively.

datatype realfmt
  = SCI of int option
  | FIX of int option
  | GEN of int option
  | EXACT
Values of type realfmt are used to specify the format of a string representation for a real or floating-point number.

The first corresponds to scientific representation:

[~]?[0-9].[0-9]+?E[0-9]+
where there is always one digit before the decimal point, nonzero if the number is nonzero. The optional integer value specifies the number of decimal digits to appear after the decimal point, with 6 being the default. In particular, if 0 is specified, there should be no fractional part. The exponent is zero if the value is zero.

The second corresponds to a fixed-point representation:

[~]?[0-9]+.[0-9]+?
where there is always at least one digit before the decimal point. The optional integer value specifies the number of decimal digits to appear after the decimal point, with 6 being the default. In particular, if 0 is specified, there should be no fractional part.

The third constructor GEN allows a formatting function to use either the scientific or fixed-point notation, whichever is shorter, breaking ties in favor of fixed-point. The optional integer value specifies the maximum number of significant digits used, with 12 the default. The string should display as many significant digits as possible, subject to this maximum. There should not be any trailing zeros after the decimal point. There should not be a decimal point unless a fractional part is included.

[FLOAT] provides a reference implementation for this conversion.

The fourth constructor EXACT specifies that the string should represent the real using an exact decimal representation. The string contains enough information in order to reconstruct a semantically equivalent real value using REAL.fromDecimal o valOf o IEEEReal.fromString. Refer to the description of IEEEReal.toString for more precise information concerning this format.

In all cases, positive and negative infinities are converted to "inf" and "~inf", respectively, and NaN values are converted to the string "nan".

type ('a,'b) reader = 'b -> ('a * 'b) option
The type of a reader producing values of type 'a from a stream of type 'b. A return value of SOME(a,b) corresponds to a value a scanned from the stream, plus the remainder b of the stream. A return value of NONE indicates that no value of the correct type could be scanned from the prefix of the stream.

The reader type is designed for use with a stream or functional view of I/O. Scanning functions using the reader type, such as skipWS, splitl, and Int.scan, will often use lookahead characters to determine when to stop scanning. If the character source ('b in an ('a,'b) reader) is imperative, the lookahead characters will be lost to any subsequent scanning of the source. One mechanism for combining imperative I/O with the standard scanning functions is provided by the TextIO.scanStream function.

padLeft c i s
padRight c i s
These return s padded, on the left or right, respectively, with i - |s| copies of the character c. If |s| >= i, they just return the string s. In other words, these functions right and left-justify s in a field i characters wide, never trimming off any part of s. Note that if i <= 0, s is returned. These functions raise Size if the size of the resulting string would be greater than String.maxSize.

splitl f rdr src
returns (pref, src') where pref is the longest prefix (left substring) of src, as produced by the character reader rdr, all of whose characters satisfy f, and src' is the remainder of src. Thus, the first character retrievable from src' is the leftmost character not satisfying f.

splitl can be used with scanning functions such as scanString by composing it with SOME; e.g., scanString (fn rdr => SOME o (splitl f rdr)).

takel f rdr src
dropl f rdr src
These routines scan the source src for the first character not satisfying the predicate f. The function dropl drops the maximal prefix consisting of characters satisfying the predicate, returning the rest of the source, while takel returns the maximal prefix consisting of characters satisfying the predicate. These can be defined in terms of splitl:
takel f rdr s = #1(splitl f rdr s)
dropl f rdr s = #2(splitl f rdr s)


skipWS rdr src
strips whitespace characters from a stream src using the reader rdr. It returns the remaining stream. A whitespace character is one that satisfies the predicate Char.isSpace. It is equivalent to dropl Char.isSpace.

type cs
The abstract type of the character stream used by scanString. A value of this type represents the state of a character stream. The concrete type is left unspecified to allow implementations a choice of representations. Typically, cs will be an integer index into a string.

val scanString : ((char, cs) reader -> ('a, cs) reader)
                   -> string -> 'a option
The function scanString provides a general framework for converting a string into some value. The user supplies a scanning function and a string. scanString converts the string into a character source (type cs) and applies the scanning function. A scanning function converts a reader of characters into a reader of values of the desired type. Typical scanning functions are Bool.scan and Date.scan.

See Also

String, Char

Discussion

local
  structure S = String
  structure SS = Substring
  structure SC = StringCvt
  datatype z = datatype IEEEReal.float_class

  fun cvt (x,n) = let
        val (prefix, x) = if x < 0.0 then ("~", ~ x)
		                  else ("", x)
        val ss = SS.full (Real.fmt (SC.SCI (SOME (n - 1))) x)
        fun isE c = c = #"E"
        fun isZero c = c = #"0"
        val expS = SS.string (SS.taker (not o isE) ss)
        val exp = valOf (Int.fromString expS)
        val manS = SS.string (SS.dropr isZero
                     (SS.takel (not o isE) ss))
        fun transf #"." = "" 
          | transf c = str c
        val man = S.translate transf manS
        val manSize = S.size man
        fun zeros i = CharVector.tabulate (i, fn _ => #"0")
        fun dotAt i =
              concat [S.substring (man, 0, i),
                ".", S.extract (man, i, NONE)]
        fun sci () = 
              concat [prefix, 
                      if manSize = 1 then man else dotAt 1,
                      "E", expS]
        in
          if exp >= (if manSize = 1 then 3 else manSize + 3)
            then sci ()
          else if exp >= manSize - 1
            then concat [prefix, man, zeros (exp - (manSize - 1))]
          else if exp >= 0
            then concat [prefix, dotAt (exp + 1)]
          else if exp >= (if manSize = 1 then ~2 else ~3)
            then concat [prefix, "0.", zeros (~exp - 1), man]
          else sci ()
        end
in
  fun gcvt (x: real, n: int): string =
        case Real.class x of
          INF => if x > 0.0 then "inf" else "~inf"
        | NAN => "nan"
        | _ => cvt (x, n)
end

The SML Basis Library emphasizes a functional view for scanning values from text. This provides a natural and elegant way to write simple scanners and parsers, especially as these typically involve some form of reading ahead and backtracking. The model involves two types of components: ways to produce character readers and functions to convert character readers into value readers. For the latter, most types ty have a corresponding scanning function of type

(char, 'a) reader -> (ty, 'a) reader
Character readers are provided for the common sources of characters, either explicitly, such as the SUBSTRING.getc and STREAM_IO.input1 functions, or implicitly, such as the TEXT_IO.scanStream. As an example, suppose we expect to read a decimal integer followed by a date from TextIO.stdIn. This could be handled by the following code:
local
  structure TIO = TextIO
  structure SIO = TextIO.StreamIO
  val scanInt = Int.scan StringCvt.DEC SIO.input1
  val scanDate = Date.scan SIO.input1
in
  fun scanID () =
        case scanInt (TIO.getInstream TIO.stdIn) of
          NONE => raise Fail "No integer"
        | SOME (intVal, ins') => 
            case scanDate ins' of
              NONE => raise Fail "No date"
            | SOME (dateVal, _) =>  (intVal,dateVal)
end
In this example, we used the underlying stream I/O component of TextIO.stdIn, which is cleaner and more efficient. If, at some later point, we wish to return to the imperative model and do input directly using TextIO.stdIn, we need to reset it with the current stream I/O value using TextIO.setInstream. Alternatively, we could rewrite the code using imperative I/O:
local
  structure TIO = TextIO
  val scanInt = TIO.scanStream (Int.scan StringCvt.DEC)
  val scanDate = TIO.scanStream Date.scan
in
  fun scanID () =
        case scanInt TIO.stdIn of
          NONE => raise Fail "No integer"
        | SOME intVal => 
            case scanDate TIO.stdIn of
              NONE => raise Fail "No date"
            | SOME dateVal =>  (intVal,dateVal)
end

The scanString function was designed specifically to be combined with the scan function of some type T, producing a function val fromString : string -> T option for the type. For this reason, scanString only returns a scanned value, and not some indication of where scanning stopped in the string. For the user who wants to receive a scanned value and the unscanned portion of a string, the recommended technique is to convert the string into a substring and combine scanning functions with Substring.getc, e.g., Bool.scan Substring.getc. Or, the user can create an input stream with TextIO.openString using the string as the source.

When the input source is a list of characters, scanning values can be accomplished by applying the appropriate scan function to the function List.getItem. Thus, Bool.scan List.getItem has the type

(bool, char list) reader
which will scan a boolean value and return that value and the remainder of the list.
[ Top | Parent | Contents | Index | Root ]

Generated October 02, 2003
Last Modified October 4, 1997
Comments to John Reppy.


This document may be distributed freely over the internet as long as the copyright notice and license terms below are prominently displayed within every machine-readable copy.

Copyright © 2003 AT&T and Lucent Technologies. All rights reserved.

Permission is granted for internet users to make one paper copy for their own personal use. Further hardcopy reproduction is strictly prohibited. Permission to distribute the HTML document electronically on any medium other than the internet must be requested from the copyright holders by contacting the editors. Printed versions of the SML Basis Manual are available from Cambridge University Press. To order, please visit www.cup.org (North America) or www.cup.cam.ac.uk (outside North America).